NovCaptureQueue

Table Of Contents

Index

NovCaptureQueue (Port)

Returns the name of the queue that the port is being captured to. A nul string indicates capturing is not active. This command can also be used to start capturing and set the queue to capture. A server can also be specified.


Example:

   Writeln NovCaptureQueue (2)    ;shows capture queue for LPT2
   NovCaptureQueue (2) = 'LASER'  ;captures LPT2 to server Laser Printer
   NovCaptureQueue (2) = 'TYME/LASER'  ;specifies server TYME
   NovCaptureQueue (2) = ''       ;End Capture on LPT2

If you are using the VLM shells, MarxMenu can capture from LPT1 to LPT9. To enable these extra printers, add this line to your NET.CFG file:

NetWare DOS Requester NETWORK PRINTERS = 9

Category:	Novell	Printer

Table Of Contents Index

Shopping
Forum
EMail
Index
Home